Featuring:
            12,000 RPM Inline Direct-Drive Beltless Spindle
            Big Pus Dueal Contact High-Performance Precision Ground Spindle
            30 Station Twin Arm Tool Changer for CAT or BT#40 Tooling
            984 IPM Rapid Rates in X & Y Axis and 787 IPM in Z For Fast Production
            300 PSI "Through The Tool" Coolant System w/Rotary Coupling
            Large Axis Travles For Big Work
            4th & 5th Axis Wiring Included w/The Machine
            4 Cross-roller Ways In The Y-Axis For Greater Capacity & Rigidity
          
          VFM-5127 TECHNICAL SPECIFICATIONS
          
          AXIS TRAVEL
          X-Axis Travel:                            51.27" 1,300mm
          Y-Axis Travel (4-Linear cross ways):      27. 56" 700mm
          Z-Axis Travel:                            25. 59" 650mm
          Spindle Nose to Table Surface:            5.9"- 31.5" 150 - 800mm
          Spindle Center to Z-axis covers:          28.96" 735 mm (throat dimension)
          
          TABLE Hardened & ground table & T-slots
          Table Size (LxW):                         57.98 x 27.56" 1,450mm X 700mm
          T-slots - 5 T-Slots:                      0.709" slot width 
                                                      18 mm on 100mm centers
          Max. Table Load:                          4,850 lbs 2200 kgs load for 
                                                      full accuracy
          
          SPINDLE
          Spindle Motor - 12,000 rpm 1:1 ratio:     30 HP Peak 15kw 20-HP 
                                                      (30-minute duty rating)
          Spindle Speed - Inline Direct-Drive:      12,000rpm 
                                                      (opt 24,000rpm Integral Spindle)
          Spindle Torque:                           90 ft-lb @ 1,500 rpm
          Tool Type:                                CAT #40 Taper (BT #40 optional)
          Spindle Taper Material / Hardness:        HRC 58-62 SCM 415
          Spindle Orientation:                      By sensor
          Spindle Runout:                           0.000040 T.I.R.
          Spindle Bearing Front:                    110mm NSK 70BNR 10 x 2 
                                                      P4 class-7 bearings
          Spindle Bearing Rear:                     110mm NSK 70BNR 10 x 2 
                                                      P4 class-7 bearings
          Retention System / Holding Capability:    Bellville Spring Stack 1650-1760 lbs
          Retention Knob Specification:             #40 Japanese standard
                                                      JMTBA double 45 head angle O.590"
          - ANSI 5/8"-11 UNC, , O.394" neck, 1.266 tool top - head top, .990" tool top -
                                                      bottom of 45 angle
          
          AXIS FEEDS
          Accuracy X, Y, & Z axis (JIS6338):        0.0002" / 12" 
                                                      0.005mm over 300mm travel
          Repeatability X, Y, & Z axis (JIS6338):   0.0001" / 12" 
                                                      0.003mm over 300mm travel
          Least Input Command Increment:            0.0001" / 0.000040" 0.001mm
                                                      (40-millionths in metric)
          Rapid Traverse X and Y:                   984 ipm 25m / minute
          Rapid Traverse Z:                         984 ipm 25m / minute
          Ballscrews - X, Y, Z:                     X, Y= 50mm ballscrews 10mm pitch 
                                                      (Z=40mm)
          Cutting Feedrate:                         0.04 - 393 ipm
          Maximum Thrust Force:                     4408 lbs 2,000 kg
          Constant Thrust Force:                    2204 lbs 1000 kg
          
          TOOL CHANGER
          Tool Capacity - 30+1:                     30 Tool Twin-Arm
          Tool Shank:                               CAT#40 Taper (BT#40 optional)
          Tool Change Time (average):               1.7-seconds tool-to-tool
          Maximum Tool Diameter / w/adjacent tool:  5.90" / 3.15" 150mm / 80mm
          Maximum Tool Length:                      11.81" 300mm
          Maximum Tool Weight:                      15 lbs. 7kg
          Tool Selection / Tool Access:             Random access Bi-directional
          
          SPECIFICATIONS
          Air Service Requirements:                 85 psi @ 14-scfm
          Coolant Capacity / Pressure:              134 gallons / 300 PSI 510 liters
          Connected load electrical requirement:    220vac  5%, 60-Hz 75-Amps
          Floor space requirements (L x W x H):     146" x 130" x 119" 370x330x260cm 
                                                      (+ 48" for conveyor)
          Shipping dimensions (L x W x H):          126" x 92" x 101" 318x231x256cm
          Machine Weight:                           19,841 pounds 9,000 kg
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com